Adjusting My Lyric
THE SOUNDLYNC® ADJUSTMENT TOOL
When you purchase your Lyric® devices you will receive a SoundLync adjustment tool.
The SoundLync adjustment tool holds a small black magnet that functions like a remote control to change the volume on your Lyric. Inside the magnet is a self-removal tool that can be used to safely remove Lyric from your ear if required. When not in use, the SoundLync can be used as a keychain so you can take it with you wherever you go.
INSTRUCTIONS FOR USE
A. TURNING LYRIC ON
1. Hold the SoundLync magnet inside the ear canal without touching the device.
2. Wait until you hear 1 BEEP.
3. Immediately remove the magnet from your ear.
B. PUTTING LYRIC IN SLEEP MODE
1. While the device is ON, hold the magnet inside the ear canal without touching the device.
2. Wait until you hear 2 BEEPS.
3. Immediately remove the magnet from your ear.
C. TURNING LYRIC OFF
1. While the device is ON, hold the magnet inside the ear canal without touching the device.
2. Wait until you hear 2 BEEPS.
3. CONTINUE TO HOLD the magnet in place until you hear 4 MORE BEEPS. (There is a short pause between the first 2 and the last 4 beeps.)
4. Remove the magnet from the ear.
D. ADJUSTING THE VOLUME
1. Put the device in SLEEP Mode – 2 BEEPS. Remove magnet.
2. Turn the device ON – 1 BEEP. KEEP THE MAGNET INSIDE THE EAR CANAL.
3. CONTINUE TO HOLD the magnet inside your ear canal until you hear a series of beeps that will increase in volume from softest to loudest. If you leave the magnet in place, the beep sequence will begin again.
4. REMOVE THE MAGNET from you ear when you reach the desired volume level.
Note: The Lyric hearing device is now automatically set at the volume level chosen. When you turn the device to SLEEP or OFF and then back ON, it will remain at this volume level until you change the volume level again.
